.
13” overall length
6 oz
7” blade in stainless shuminagashi (vg10 core at 60 hrc)
1 7/8” at the heel, 2mm thick spine and .2mm behind the edge with distal tapers in all measurements to the point.
~6” handle heavily sculpted from Australian ringed gidgee with a mammoth accent and 5mm Mokume gane (brass/copper) Bolster.
The front is my round belly wa cross section, but this swells and tapers into a fully rounded heel.
Wood or kydex saya sheath available on request
.
13” overall length
6 oz
7” blade in stainless shuminagashi (vg10 core at 60 hrc)
1 7/8” at the heel, 2mm thick spine and .2mm behind the edge with distal tapers in all measurements to the point.
~6” handle heavily sculpted from Australian ringed gidgee with a mammoth accent and 5mm Mokume gane (brass/copper) Bolster.
The front is my round belly wa cross section, but this swells and tapers into a fully rounded heel.
Wood or kydex saya sheath available on request
